When you’ve done something for a while, you start to take it for granted.
There’s nothing like talking to others about 3D printing – and, best of all, showing it to them – to remind me how remarkable this technology is for many people.
Recently, my wife spoke with a woman who had never even heard of 3D printing. That’s pretty mind-blowing.
Most of the people who attended the inaugural “Technology & Art: A Tinker Time For All Ages” on Saturday, October 21 had heard of it but never seen a 3D printer in action.
They have now….
Read More →
When I commissioned the creation of my 8-foot-tall Cerberus 3D Gigante 3D printer 3 years ago, I knew that the technology would change.
Of course, technology changes all the time, but in the fast-moving field of 3D printing, it changes as fast as you can type.
As chronicled in this blog, Cerberus 3D “mad scientist” and all-around cool guy Steve Graber and I made a lot of changes in the Gigante as we worked through the issues that arose when using the printer. Software, hardware and filament all demanded tweaking, and finally we got the Gigante running well.
There were still issues, though. The biggest was a tendency for the print to just … stop. The printer would freeze, and the computer would join it, stuck in some sort of limbo while I pulled my hair out trying to figure out why I’d just lost yet another print.
Sometimes it was simply that the computer, which is dedicated to running the Gigante, decided to update. I dealt with that by always firing up the computer well before I started printing. OK, that worked most of the time.
Finally, though, it became clear that the processor just wasn’t handling the information fast enough ….
Read More →