Archive for art

Metal filler works wonders with ABS filament

An as-yet-untitled 3D printed fine art sculpture by Phoenix artist Kevin Caron.Since I moved my 3D Systems CubeX 3D printer down to the studio, I’ve been able to play with it while I’m in the office cooling down – Arizona summers are really brutal when you work with fire and wear heavy protective gear. The CubeX gives me another way to play that keeps me under 1000 degrees.

One reason I hang onto this old 3D printer – it was the first one I owned – is that it prints ABS (acrylonitrile butadiene styrene) filament (the same stuff used in Lego bricks), which is petroleum-based. Although I mostly print in PLA (polylactic acid), ABS lets me do some things I can’t do with PLA.

In particular, it lets me print the two forms shown in this post, which my deltabot printers’ software just can’t seem to handle. The CubeX software can handle the thin edges better and print pieces without supports, which means much far less clean up. It also lets me use a filler that PLA probably wouldn’t put up with.

Accordingly, I decided to create these two forms for an upcoming show. I knew they wouldn’t print perfectly, though, so some body work was in my future ….

Read More →

A tale of two 3D-printed sculptures

Lemon Pisa, a 3D printed fine art sculpture - Kevin CaronI’ve written before about how I never create exact multiples of designs, 3D printed or otherwise. It’s possible, it’s just my philosophy to always create unique artworks.

That being said, I do enjoy creating variations of sculptures – something I also do with my metal works – which is how series develop. (If you go to my Website, you’ll see how I have multiple sculptures in the same vein, which are organized as series, in both my Fine Art and Home & Garden categories.)

Sometimes series develop because, as I create one sculpture, I can’t help thinking, “I wonder what would happen if I … ” took a different approach than the one I am already committed to on the piece I’m currently making.

Other times, someone will say something and spark an idea, and I can’t wait to see if it will work in a new sculpture. (A good example of this is Opioid, a 3D-printed sculpture with a light inside. I’ll do more with lights, too – it’s the single most asked question about my large format 3D printed sculptures: “Can you put a light in it?”)

Recently I 3D printed a piece on my 8-foot-tall Cerberus 3D Gigante 3D printer for a visiting TV crew and decided I wanted to make a variation on this design using the same luscious filament  ….

Read More →

A rainbow of colors comes to 3D printing filament

RAL color wheelI originally began working in wood (OK, in cars, if you want to go back further). I didn’t do anything professionally with it, but I built some furniture.

Then I turned to metal, which has been the bulk of my practice since I began selling my artwork in the early 2000s.

About 4 or so years ago, I began playing with 3D printing.

Now I work with metal during the day, and 3D print in the evenings and on weekends, having fun with various filaments and forms along the way. I’ve sold a number of 3D-printed sculptures, the largest of which is 5-1/2 feet tall.

It’s been amazing to watch 3D printing evolve so quickly, and to see intersections between my metalworking and 3D printing worlds. Now another intersection, or blurring of the lines, has happened, and this one is a big deal ….

Read More →

Combining 3D printing filaments

MatterHackers PRO Series Flex 3D printer filamentMatterhackers Taulman Black T-Glase 3D printing filamentThe more I work with 3D printing (and, well, anything I do), the more questions bubble to the surface ….

   Can I make the material do this?

   What if I do that?

   Do I really need to ….

A lot of times, things work out. For instance, I did a  couple of videos about welding copper and steel (yeah, it worked, but I wouldn’t walk on a bridge welded that way).

Sometimes, not so much (I once filled cuts in a steel bell with copper, only to find out that oxidation was not kind to it).

That brought me to my latest wild hare chase, which is to combine 2 different types of 3D printing filament in a single print, and what the heck, I think I’ll throw in some sand, too ….

Read More →

3D-printed sculpture storms Tucson

A visitor to the Sculpture Tucson art show watches a Cerberus 3D 250 3D printer printing - Kevin CaronOK, maybe I went a little overboard in the headline, but I’m still really jazzed at the reception of my 3D-printed sculpture at the recent Sculpture Tucson show in, yes, Tucson, Arizona (is there another Tucson? Hmmm, I’ll have to look that up ….)

The turnout at the show was incredible. Preliminary estimates say that 4,300 people came through in just 2-1/2 days April 6 – 8.

Although the show was outside at Brandi Fenton Park, I had my Cerberus 3D 250 running the whole time. Amazingly enough, it only failed once when the wind got the best of it, but overall, it performed beautifully.

It also fascinated people. A few people who came by knew about 3D printing, but most visitors had never seen a 3D printer running before. That meant I did a lot of education, which is how it usually goes when I have the printer running at an event.

We actually apologized to the artists around us, who had to hear the spiel over and over and over again. The challenge was always explaining it like I’d never said it before, but what I would say seldom varied (“… start in CAD …” “… the filament comes down from here …” “… like a big glue gun …”) ….

Read More →

Getting it together: connecting 3D prints

Untitled 3D printed fine art sculpture - Kevin CaronEven though I have an 8-foot-tall 3D printer that will print up to 4 feet tall, there are times I’d like to make something bigger.

I have done that, as evidenced in the 5-1/2 foot tall sculpture Epic Swoon (below), which was commissioned by PriceCooperswaterhouse in Columbus, Ohio. That sculpture, the tallest 3D-printed piece I’ve made to date, reached its height by placing the main part of the sculpture on a black pedestal.

In all honesty, I have not had much luck yet in matching parts so that they can be put together seamlessly, so the contrasting pedestal was a handsome workaround.

Recently I created another sculpture (right) – well, at least the start of one – by printing 2 sections and sliding them together using slots. The fit is tight and requires no adhesive, but it wouldn’t hurt, either.

So it’s no surprise that Pinshape‘s recent post about using adhesives for 3D prints caught my eye ….

Read More →

Alien forces invade 3D print

As-yet-untitled 3D printed sculpture - Kevin CaronCrazy things happen with 3D printing, especially with my 8-foot-tall Cerberus 3D Gigante 3D printer.

As Steve Graber, who built this monster, has said, whatever this printer does, it does spectacularly. That definitely includes surprises like the “slubs” on my sculpture Love and Marriage, which are explainable, and recent moments like the time the print head decided to print a foot to the left of the print bed.

The most recent and as-yet-unexplainable oddity – or, as it’s called in the art world, “artifact” – is what it did to a print I just finished ….
Read More →

Seeing in 3D – Using 3D printing for prototyping

3D printed stem of Schubertii sculpture - Kevin CaronWhen 3D printing first became popular for more general use – it’d already been around 20 years in industrial and scientific settings – “rapid prototyping” was the buzzword you heard everywhere. (After I started working with 3D printing and especially my 8-foot-tall Cerberus 3D Gigante 3D printer, I found this hilarious – there wasn’t much rapid about it.)

While I do create sculptures using 3D printing, I also use it for protyping. It’s really important when I’m creating a sculpture in CAD and then actually building it in metal to be able to see all aspects of the form.

A great example is a sculpture I’m just beginning, Schubertii. Based on the plant by the same name, this sculpture will be 12 feet tall. Seven feet of that will be the sculpture’s “stem.”

The stem is fairly simply to look at, but creating it in metal is going to be, well, challenging. Its round edges and flowing form will require me to use a combination of tools – air shaper, English wheel, maybe even the slapper (yeah, there really is a tool called a slapper) – to get the rounded form that is the opposite of how metal comes, in flat sheets.

To get the form right, I printed the stem maquette, or model, on my Cerberus 3D 250 desktop 3D printer ….

Read More →

Tinker time for all ages: event turns on young and old

3D printing at Arts & Technology event in Surprise, AZ - Kevin CaronWhen you’ve done something for a while, you start to take it for granted.

There’s nothing like talking to others about 3D printing – and, best of all, showing it to them – to remind me how remarkable this technology is for many people.

Recently, my wife spoke with a woman who had never even heard of 3D printing. That’s pretty mind-blowing.

Most of the people who attended the inaugural “Technology & Art: A Tinker Time For All Ages” on Saturday, October 21 had heard of it but never seen a 3D printer in action.

They have now….

Read More →

Worlds Collide: 3D Printing Experience Informs Metal Sculpting

Dynatorch Super B 4x4 CNC Plasma TableSince I became a full-time artist in 2006, I’ve purchased and used a lot of tools. A lot of tools. If you took the recent video tour of my studio, you see many of them, and yes, I use them all. Using the right tool for the job can mean the difference between a job well done and one that turns out just OK, and the difference between spending hours and committing days to a single task.

Recently, I “moved up” in the world of metal working with a purchase of a Dynatorch Super B 4×4 Plasma CNC table (right). This tool allows me do jobs in an hour that would have taken me days, and does them better. It cuts out the metal accurately and cleanly – no more cutting close, then trimming or grinding to size!

The CNC table is a game changer for me, much like my 3D printers have been.

Interestingly enough, my experience with 3D printing helped me get up to speed on the Super B a lot faster than I would have otherwise ….

Read More →