Archive for deltabot 3D printer

Combining 3D printing filaments

MatterHackers PRO Series Flex 3D printer filamentMatterhackers Taulman Black T-Glase 3D printing filamentThe more I work with 3D printing (and, well, anything I do), the more questions bubble to the surface ….

   Can I make the material do this?

   What if I do that?

   Do I really need to ….

A lot of times, things work out. For instance, I did a  couple of videos about welding copper and steel (yeah, it worked, but I wouldn’t walk on a bridge welded that way).

Sometimes, not so much (I once filled cuts in a steel bell with copper, only to find out that oxidation was not kind to it).

That brought me to my latest wild hare chase, which is to combine 2 different types of 3D printing filament in a single print, and what the heck, I think I’ll throw in some sand, too ….

Read More →

3D-printed sculpture storms Tucson

A visitor to the Sculpture Tucson art show watches a Cerberus 3D 250 3D printer printing - Kevin CaronOK, maybe I went a little overboard in the headline, but I’m still really jazzed at the reception of my 3D-printed sculpture at the recent Sculpture Tucson show in, yes, Tucson, Arizona (is there another Tucson? Hmmm, I’ll have to look that up ….)

The turnout at the show was incredible. Preliminary estimates say that 4,300 people came through in just 2-1/2 days April 6 – 8.

Although the show was outside at Brandi Fenton Park, I had my Cerberus 3D 250 running the whole time. Amazingly enough, it only failed once when the wind got the best of it, but overall, it performed beautifully.

It also fascinated people. A few people who came by knew about 3D printing, but most visitors had never seen a 3D printer running before. That meant I did a lot of education, which is how it usually goes when I have the printer running at an event.

We actually apologized to the artists around us, who had to hear the spiel over and over and over again. The challenge was always explaining it like I’d never said it before, but what I would say seldom varied (“… start in CAD …” “… the filament comes down from here …” “… like a big glue gun …”) ….

Read More →

Switch cuts out 3D printing problem

3D printed table base - Kevin CaronAbout a week ago I decided to tackle a project I’ve been thinking about for a while. I have a beautiful glass tabletop and thought it would be fun to 3D print a base for it.

Fun?! I like to go into a project thinking positively, but maybe that just set me up ….

Anyway, the first day of what would be a 5-day print went fine. It was when I had to change out the 5-pound spool of PLA filament on my 8-foot-tall Cerberus 3D Gigante 3D printer that things went terribly wrong.

The print paused normally, then I switched out the spool of natural filament and loaded up the new spool. When I tried to resume the print, though, everything went haywire. The printhead swung wildly out of position, and the print was lost.

I was ready to pull my hair out! A whole $100 spool of filament and a day of 3D printing had been lost. Not to mention the frayed nerves.

Then Steve Graber, the man who built the Gigante, told me about the switch ….

Read More →

Seeing in 3D – Using 3D printing for prototyping

3D printed stem of Schubertii sculpture - Kevin CaronWhen 3D printing first became popular for more general use – it’d already been around 20 years in industrial and scientific settings – “rapid prototyping” was the buzzword you heard everywhere. (After I started working with 3D printing and especially my 8-foot-tall Cerberus 3D Gigante 3D printer, I found this hilarious – there wasn’t much rapid about it.)

While I do create sculptures using 3D printing, I also use it for protyping. It’s really important when I’m creating a sculpture in CAD and then actually building it in metal to be able to see all aspects of the form.

A great example is a sculpture I’m just beginning, Schubertii. Based on the plant by the same name, this sculpture will be 12 feet tall. Seven feet of that will be the sculpture’s “stem.”

The stem is fairly simply to look at, but creating it in metal is going to be, well, challenging. Its round edges and flowing form will require me to use a combination of tools – air shaper, English wheel, maybe even the slapper (yeah, there really is a tool called a slapper) – to get the rounded form that is the opposite of how metal comes, in flat sheets.

To get the form right, I printed the stem maquette, or model, on my Cerberus 3D 250 desktop 3D printer ….

Read More →

The mystery of the 3D print fail

Overheat screen for 3D printer - Kevin CaronIt starts out so innocently …. Doesn’t it always, especially with 3D printing!

I wanted to print something using NGen_FLEX (usually called “Ninjaflex”) rubber filament on my 8-foot-tall Cerberus 3D Gigante printer when I got a “Runaway temperature warning” (right), and the printer shut down.

I checked the graph in Simplify 3D, the combination host and slicer program I was using, and saw the temperature spiking instead of its usual gradual climb.

I shut off the 3D printer, let it cool, and tried it again. Same problem.

I printed the same file with regular PLA and had no problem.

There was only one thing to do …

Read More →

Tinker time for all ages: event turns on young and old

3D printing at Arts & Technology event in Surprise, AZ - Kevin CaronWhen you’ve done something for a while, you start to take it for granted.

There’s nothing like talking to others about 3D printing – and, best of all, showing it to them – to remind me how remarkable this technology is for many people.

Recently, my wife spoke with a woman who had never even heard of 3D printing. That’s pretty mind-blowing.

Most of the people who attended the inaugural “Technology & Art: A Tinker Time For All Ages” on Saturday, October 21 had heard of it but never seen a 3D printer in action.

They have now….

Read More →

3D Frankenstein: Gigante 3D printer gets a new brain

When I commissioned the creation of my 8-foot-tall Cerberus 3D Gigante 3D printer 3 years ago, I knew that the technology would change.

Of course, technology changes all the time, but in the fast-moving field of 3D printing, it changes as fast as you can type.

As chronicled in this blog, Cerberus 3D “mad scientist” and all-around cool guy Steve Graber and I made a lot of changes in the Gigante as we worked through the issues that arose when using the printer. Software, hardware and filament all demanded tweaking, and finally we got the Gigante running well.

There were still issues, though. The biggest was a tendency for the print to just … stop. The printer would freeze, and the computer would join it, stuck in some sort of limbo while I pulled my hair out trying to figure out why I’d just lost yet another print.

Sometimes it was simply that the computer, which is dedicated to running the Gigante, decided to update. I dealt with that by always firing up the computer well before I started printing. OK, that worked most of the time.

Finally, though, it became clear that the processor just wasn’t handling the information fast enough ….

Read More →

Sharing 3D-printing possibilities

Some artists hold their processes close to their vests (where did that expression come from? Who wears a vest anymore? Sorry – mind wandering ….).

I’m not one of them.Arizona Artists Guild logo

I have a large and active YouTube channel with more than 450 videos in which I share metal fabrication and 3D-printing tips. I also have held many events for other artists at my studio and at my home, where I have my 3D printers (the studio is just too dirty – I make dirt there!). I’ve even held events for other artists at my art shows.

So when the Arizona Artists Guild asked me if I’d do a program for the organization’s sculpture group, of which I’m a member, I was glad to do it.

But this time, I decided to do it a little differently ….

Read More →

Stick this! Adhering a 3D print is key during printing

3d printing-lifted corner - Kevin CaronOne of the challenges of 3D printing that I think – knock on wood – I’ve finally worked through is adherence to the print tray.

There’s nothing more frustrating than having a 3D print come loose from the tray while a print is underway, and it’s something that’s happened to me far more times than I even like to think about.

The Cerberus 3D Gigante’s large format prints are particularly prone to this problem – I have a few large prints the corners of which have “flipped up” slightly because they cooled faster than the rest of the print. See an example to the right – fortunately in this case, it works with the concept and theme of the sculpture!

Sometimes, though, a lifted corner ruins the print altogether.

Other times, on any of my printers, a 3D print simply comes loose from the print tray – then it’s game over.

But I’ve learned a few things and updated some to improve my quality and finish rate ….

 

My 3D Systems CubeX came with some sticky stuff that I used on that 3D printer until I got my Cerberus 3D machines, when I learned about using hairspray. Yes, hairspray. (I’m sure they wonder at the grocery store when I buy three or four cans of Suave Extreme Hold hairspray. I just smile.)

Suave Extra Hold Hair Spray - 3D printingI still use hairspray – more on that in a moment – but I’ve gotten away from using blue tape. That was the other trick I learned when I got my Gigante. I’d apply painters’ blue tape – the kind that is supposed to release easily – to the print tray, pressing down just as hard as I could. It worked sometimes, but not always. Also, not all blue tape is created equally, apparently.

I don’t like the blue tape because

  1. It is hard to get off the tray
  2. It’s especially difficult to get off the sculptures
  3. It doesn’t always seem to work.

What seems to work best is a heated tray. That’s why I added one to my CubeX and another to the Gigante. 3D prints adhere much better with heat! I don’t think I’ve had a problem with large format prints lifting up since I installed the heated tray on the Gigante.

Of course, you don’t just use heat. Before I start a 3D print, I also clean the print tray well, then spray it liberally with hairspray before I start printing.

Of all the challenges with 3D printing, I think – THINK – I have this one licked.

3D Printing Mystery Continues…

Troubleshooting - Kevin CaronWouldn’t it be awesome if things just worked?

Yeah, they do sometimes, but especially in these early days of 3D printing, there are so many variables and things change so quickly that it seems there are myriad things that can and do go wrong.

Lately I’ve been battling a problem with both of my deltabot 3D printers, and I still haven’t figured out what is causing it.

The result is ugly: they just stop printing. For no apparent reason. Everything is going well, and then the hotend just stops moving.

Aaaargh!

I can’t just give up – it isn’t in my nature.

So I’ve been doing what I always do when troubleshooting any problem ….

I work through a process of elimination, testing and ruling out various possibilities.

Here’s what I’ve done thus far:

  1. Confirmed that it isn’t on just one 3D printer. It seems that I’m having the same problem with both deltabots.
  2. Confirmed that it isn’t Windows 10. That’s because it’s also happening on a computer that is running Windows 7. If it were just Windows 10, that’d be one thing, but the other computer hasn’t had an update in years and ran just fine.
  3. Confirmed that it isn’t the host program. I’m having the problem with both Repetier – two different versions of it – and Simplify. I’ve checked Simplify’s log and see it says the firmware is unresponsive, which brought me to my latest hunch (below).
  4. Removed the host program from the equation altogether. I put the file directly into the Gigante (yes, I used a ladder to do it). Same problem.
  5. Confirmed that it isn’t a power problem. One of the computers is plugged directly into the wall, while the other runs through an uninterrupted power supply.
  6. Ruled out the file itself. This has happened with several files, so it isn’t the design.
  7. Made sure it isn’t a filament bulge problem. It’s happened with various filaments, including two different diameters (3 millimeter and 1.75).
  8. Noted that it has happened shortly after the print started and just before it finished. If it were related to the file length, you’d think that would be more consistent.

At this point, I’m thinking it might be the controller board. I believe both 3D printers have Smoothie boards, so that might be it.

So I’ll just keep poking around on forums, talking to people, consulting my expert, and eliminating problems, hoping that one of them is the solution that gets me back up and 3D printing again.

And if this is just a test of my patience, I hope I have already passed!