fine art

home & garden


work in progress


3-d printer
ahp tools
engineering kinetic sculpture
everlast tools
finish work & patinas
focus on art
how to create a sculpture
longevity tools
milling machine & metal lathe
public art
shop math: measuring & leveling
studio tour
tools for the studio
transporting & installing videos
arc welding
bending & shaping
cutting & grinding
general welding
health & safety
mig welding
other techniques
specific projects
tig welding
tool how-to's

  * How to Polish Stainless Steel
  * Why You Should Read the @#$% Manual
  * How to Stick Weld 1/4" Steel Plate Using the Everlast Power i-MIG 253DPi
  * The Story Behind ... My Gordian Accordian Sculpture Series
  * Should You Use a Lap Joint or a Butt Joint When Welding?

more ...

"Wow! Your work is OUTSTANDING!"
--Racheal Anilyse, publisher, Underground Art School Magazine

Bookmark and Share

< Back
Next >

How to Lift Items Easily - the Old School Way

Kevin is lifting some large and heavy pieces of 5" square steel tubing onto his workbench. A viewer had written in and asked what those ropes were that Kevin was using in his video about the magnetic lifter.

He explains they are a block and tackle, which has one block, or pulley, at the bottom and another at the top. The ropes in between are what is called tackle. It's very old school - the technology has been around for a long, long time.

There are lots of different types and styles of block and tackle. The one Kevin is using has three "sheaves," or grooved wheels, that the ropes run through, giving greater mechanical advantage. They let you pick up a heavier load with less pulling. The block and tackle is doing the work for you.

Each of the 5" x 5" x 1/4" wall steel tubes Kevin is lifting weighs about 140 pounds. Could he lift them onto the workbench himself? Yes. Does he want to? No. That's what he got the block and tackle for. It's just a whole lot easier to use a block and tackle than to pick them up by hand.

The block and tackle also lets Kevin do a whole lot more work by himself. It's safer and quicker and is much better for his back.

There are a couple of things to keep in mind if you're going to add a block and tackle to your shop. First, make sure your block and tackle is attached to a strong, solid beam. The beam his block and tackle is screw into is two 2x6s on edge, sandwiched together, with a strap around them. It's good and solid, which is important if you are going to pick up anything heavy with it, like an engine block.

If you are picking up something big and heavy, also try to get your attachment to the item centered so it picks it up flat and square rather than off to one side.

You want to watch the equipment ratings, too. Different block and tackles are rated to lift different weights - 100 pounds, 200 pounds, etc. Kevin's is rated to pick up 2 tons, so it will pick up a lot more than those two 2x6 beams will even hold.

Finally, the more sheaves you have, the more rope you'll need and the more you have to pull to lift items. A single pulley will lift pretty quickly, but a triple pulley means a lot more pulling to do the same work, but it's easier. So make sure you have enough rope - Kevin thinks he has about 50 feet on his block and tackle.

A block and tackle is a great tool - it doesn't use gas or electricity, doesn't make noise, and is a great workout for the arms and chest when you are picking up something with it. And it just hangs out up there until you need it.

Kevin found his on eBay, but you can also find them on Amazon and probably also brick-and-mortar stores in your area.

Before you head out, hang around for another moment to learn about mechanical advantage (or not) ....

Watch more videos now